FGAC-T-032A-V-0.0M-22060000035
Charging device socket outlet for charging electric vehicles (EVs) with alternating current (AC), compatible with the national standard AC vehicle charging device plug for installation in EVs
- Overview
- Technical data
- Accessories
- Certification
- Business data
- Download
Product certification
Product advantages
☑All Degson's vehicle sockets and charging pile power sockets adopt a unified design☑The surface of power and signal contacts are silver-plated
☑Certified to IATF 16949:2016
☑Ergonomic and easy to operate
- 3D model
- Environmental conditions
- Electrical characteristics
- Mechanical properties
- Installation
- Marking material
- Lock actuator
- Bag
- Temperature Sensor
- Environmental Product Compliance
- Connection capacity
- Cable
- Dimension
3D model
Environmental conditions
| Maximum altitude | 5000m(Above sea level ) |
| Ambient temperature (operation) | － 30 °C ~ 50 °C |
| Ambient temperature (storage / transport) | － 40 °C ~ 80 °C |
| IP class | IP54（protection cover） |
Electrical characteristics
| Maximum charge power | 8KW |
| Phase | 3 |
| Power contact rated voltage | 440 |
| Quantity of signal contacts | 2 |
| Signal contact rated current | 2 |
| Signal contact rated voltage | 30 |
| Signal transmission type | Pulse width adjustment |
| Connection method precautions | Crimp connection, cannot be disconnected |
| Temperature measurement | 2x Pt 1000 (DIN EN 60751) |
Mechanical properties
| Insertion/pullout cycle | 10000 |
| Insertion force | < 100N |
| Pull out force | < 100N |
Installation
| Available installation location | Installation in front of the board |
| Limit of the installation location | Only allow 0 to 90 degrees frontal tilt |
| Lock actuator installation location | Top center |
| Mounting hole diameter | 7.00 mm (ø) |
Marking material
| Shell color | black |
| Customization basis | Provided according to customer requirements |
| Contact surface material | Ag |
| Marking material | Plastic |
Lock actuator
| Lock type | Secured by locking device after insertion |
Bag
| Dimension | ø350*100mm |
Temperature Sensor
| Standard | DIN EN 60751 |
| Recommended measured current | 1 mA (1 V at 0°C ) |
| Recommendation to measure tolerance on current sensors | ±1K |
| Temperature range | _50 °C ... 150 °C |
| Temperature coefficient (TCR) | 3850 ppm/K |
| Long-term stability（maximum R0-Drift) | 0.06 % (After 1000 hours at 130°C ) |
| Shutdown temperature | 90 °C Equivalent to Pt 1000 value 1346.5 Ω |
Environmental Product Compliance
| REACH | conform |
| China RoHS | conform |
Connection capacity
| AWG | 26~10AWG |
Cable
| Cable composition | 3*6mm²+2*0.75mm² |
Dimension
| Vehicle connector height | 101mm(Vehicle charging connector) |
| Vehicle connector width | 75mm(Vehicle charging connector) |
| Depth | 63.2mm |
| Hole diameter | 60mm x 60 mm |
| Wire length | 0m |
| width | 76mm |
CQC parameters
| Overvoltage category/Degree of pollution | III/3 | ||
| Rated voltage | 440V | ||
| Rated current | 32A | ||
| IP class | IP54 |
| Order number | 22060000035 |
| Packing unit | 5pcs/box |
| Minimum order quantity | 5 |
| Products weight (without packaging) | 13.65 |