제품 선택 지원

FGAC-S-032A-P-0.0M
22060000030

Charging device outlet for charging electric vehicles (EVs) with alternating current (AC), compatible with national standard AC powered charging device plugs for installation in electric vehicle charging stations (EVSE)

대비

제품 타입

매번 마다 4개제품 대비가능함. 대체할 제품 선택 부탁 드립니다.

    • 종람
    • 기술 데이터
    • 악세사리
    • 인증
    • 비즈니스 데이터
    • 다운 로드

    제품 인증

    제품 장점

    ☑All Degson's vehicle sockets and charging pile power sockets adopt a unified design
    ☑The surface of power and signal contacts are silver-plated
    ☑Certified to IATF 16949:2016
    ☑Ergonomic and easy to operate
    1. 3D
    2. Environmental conditions
    3. Electrical characteristics
    4. Mechanical properties
    5. Installation
    6. Marking material
    7. Locking device
    8. Lock actuator
    9. Cable
    10. Bag
    11. Temperature Sensor
    12. Environmental Product Compliance
    13. Dimension

    3D

    Environmental conditions

    Maximum altitude5000m(Above sea level )
    Ambient temperature (operation)- 30 °C ~ 50 °C
    Ambient temperature (storage / transport)- 40 °C ~ 80 °C
    IP classIP54(protection cover)

    Electrical characteristics

    Maximum charge power8KW
    Phase1
    Power pin quantity3
    Rated current of high-power contacts32
    Power contact rated voltage250
    Quantity of signal contacts2
    Signal contact rated current2
    Signal contact rated voltage30
    Signal transmission typePulse width adjustment
    Connection method precautionsCrimp connection, cannot be disconnected
    Temperature measurement2x Pt 1000 (DIN EN 60751)

    Mechanical properties

    Insertion/pullout cycle10000
    Insertion force< 100N
    Pull out force< 100N

    Installation

    Available installation locationInstallation in front of the board
    Limit of the installation locationOnly allow 0 to 90 degrees frontal tilt
    Lock actuator installation locationTop center
    Mounting hole diameter7.00 mm (ø)

    Marking material

    Shell colorblack
    Customization basisProvided according to customer requirements
    Contact surface materialAg
    Marking materialPlastic

    Locking device

    Lock typeSecured by locking device after insertion

    Lock actuator

    Poles of pluggable connectors4
    Nominal operating voltage12V
    Motor possible supply voltage range9-15.5V
    Lock detection maximum voltage12V
    Response time≥0.02S
    Work cycleOn:off=0.02S:10S
    Working temperature_40 °C ... 80 °C
    Withstand voltageDC1000V
    Power32W±10%
    Service life>10000 times without load
    Ambient temperature (operation)_30 °C ... 50 °C
    Cable length0.3m
    Cable composition4 x 0.5 mm²

    Cable

    Cable composition2 x6 mm² + 1 x 10 mm² + 2× 0.75 mm²

    Bag

    colorBlue
    Dimensionø350*100mm

    Temperature Sensor

    StandardDIN EN 60751
    Recommended measured current1 mA (1 V at 0°C )
    Temperature range_50 °C ... 150 °C
    Temperature coefficient (TCR)3850 ppm/K
    Long-term stability(maximum R0-Drift)0.06 % (After 1000 hours at 130°C )
    Shutdown temperature90 °C Equivalent to Pt 1000 value 1346.5 Ω

    Environmental Product Compliance

    REACHconform
    China RoHSconform

    Dimension

    Depth63.2mm
    Hole diameter60mm x 60 mm
    Wire length0m
    0.3 m (Lock the actuator cable)
    width76mm
    Height115.8mm

    CQC parameters

    Overvoltage category/Degree of pollution III/3
    Rated voltage 250V
    Rated current 32A
    IP class IP54
    발주 번호 22060000030
    포장 단위 5pcs/box
    MOQ 5
    제품 무계 (포장 제외) 13.65
    3D
    FGAC-P.stp 다운 로드
    CAD Data
    FGAC-S-032A-P-03-0.0M-03A(H).dxf 다운 로드
    Data
    FGAC-S-032A-P-03-0.0M-03AH.pdf 다운 로드

    유사한 제품

    온라인 컨설팅